The New Year is finally here! It’s nice to take this time to think about everything we’ve accomplished in 2018, as we get excited to begin 2019. That’s why we’d like to take a moment and reflect on the top five manufacturing posts published on the HUI Manufacturing Blog in 2018.
IP ratings define an electrical enclosure’s level of protection against ingress of water and solid objects based on the enclosure’s ability to pass performance criteria outlined by the international standard IEC 60529. The rating consists of the letters IP followed by two digits, e.g. IP54. The first digit indicates the level of protection against solid objects. The second digit indicates the level of protection against liquids. To help you understand what kind of protection each IP rating offers, we’ve created this guide for your reference. Read more
There are two types of enclosure rating systems. One is the National Electronic Manufacturers Association (NEMA) rating system, which is primarily used in the U.S. and Canada. The other is Ingress Protection or International Protection (IP) rating system. Both of the standards establish specifications about the performance criteria for different enclosures. To help you determine which type of enclosure is right for you, we’ve put together a list of NEMA enclosure types, IP Equivalency Ratings and definitions to help you compare your options. Read more
No matter the situation, it’s difficult to watch your hard work go to waste. This is a common occurrence when manufacturers receive a sheet metal layout dimensioned in the flat pattern. These dimensions may seem helpful, but after your manufacturer makes bend deductions based on their capabilities and other bending factors, your dimensions will become unusable. To avoid wasting time on incorrect measurements, always dimension to the formed view, and here’s why:
A common problem that may occur when working with an industrial manufacturer is that they will often need to correct dimensioning measurements from your original drawing. Your manufacturer will make these edits so they will be able to model the part and confidently meet the outlined measurements during inspection. However, these corrections require extra time and labor cost to keep the project moving forward. To help you prevent these common dimensioning mistakes we’ve put together some reference pictures and information to help you understand the correct dimensioning information to give your manufacturer.
When creating a new custom enclosure take time to consider which parts, or hardware, you can share between designs. For example, if one preexisting design has specific studs or latches, you might use the same ones for multiple enclosures when appropriate. Designing with intentional commonalities can benefit both you and your customers, and here’s why.
Are you having a hard time deciding whether you should modify a standard enclosure or have a new custom enclosure built for your industrial redesign project? Here’s some information to help you choose the right option for your needs.